PMUE “Postavy Furniture Center” produces a three-layer one-lane parquet board PD-3, where the top layer is lamina of oak or pine, middle and base layers are made of pine sawn wood products.
The width variation: 110 mm, 140 mm, 190 mm, 300 mm.
The length variation: for the width 110 mm, 140 mm, 190 mm – 764 mm, 1100 mm, 1436 mm, 2200 mm, for the width of 300 mm – 1400 mm and 2800 mm.
The variation of thickness: 12,5mm, 16mm, 19mm
The package of the parquet is filled with all four lengths. The type of connection is tongue-and-groove.
Also, the PMC produces the parquet in mono-length -764mm, which is used for laying “herring bone”. By the contrast with the standard laying ( French technology), the laying “herring bone” is more dynamic and bright. The strips of board are used in order to create this effect, which coincide at right angle in a vast amount. This kind of parquet is perfectly suited for interior decorations of large rooms where the texture is well- noticeable.
The Parquet is a natural floor covering which consists of separate wood boards which are made of a certain kind of wood. The size of these boards may vary to a wide range.
Depending on the texture and the image of the wood, the parquet can be classified into the following selections:
Select is a high-quality parquet board of tangential or mixed sawing. It has natural wood look, slight variation of pattern and colour is possible. It includes homogenic texture without sharp drops and colour difference. Healthy natural knots under 5 mm are admitted. Sapwood and cracks are not admitted.
Natur is the wood of mixed sawing having natural wood look and bright texture. The healthy undropped knots under 50 mm, dropped knots under 40 mm and cracks which are filled with filler are admitted. On the top layer it is possible to see colour variation, ray cells and medullary spots. There could be slight sapwood on the top.
Rustic is a kind of wood without selection according to the sawing. It has prominent texture, where the two-tones is admitted on the whole surface of the parquet board, the differences in colour and texture (on the surface such differences are represented by soft or hard wood), healthy undropped knots and dropped ones over 40 mm, which are filled with filler, are admitted. There could be little unfilled cracks that underline natural beauty of the wood and filled cracks of different length.
It is very important to take into account that the selection of any producers may differ. And according to this reason even the producers have the same name and the selection, the parquet may differ from the point of quality.
The Producer of the chemical materials for colouring of the parquet is firm BONA, Sweden. In worldwide practice, company BONA is identified with the highest standard of upkeeping and laying of the wood floors. BONA is a widely known international concern which creates and produces goods for wood floor approximately during 100 years.
Bona stands out for its specialized orientation in work among the various producers. Everything that this company does, is dedicated for the wood floor.
Nowadays, BONA is a dynamically developed company, has divisions in 17 countries of the world, and it’s distributors in 35 countries. Bona group combines six factories in Sweden, Germany, the USA and China. Bona unified the qualified group of scientists who always do a scientific-research work in special laboratories.
The goods, which BONA offers, are the result of hard scientific and practical work.
